Electric Room thermostat for Floor Heating
Electric Room thermostat for Floor Heating-HTW-21-24 is used for 2-position control with on/off output for the control the temperature by means of an NTC sensor placed externally or internally in the thermostat.The thermostat acquires the room temperature with its built-in sensor or floor sensor, and the heating contact will close when the room temperature falls below the selected set-point.
For the control of warm-water (floor) heating systems and direct electric heating systems used in Commercial buildings, Residential buildings, Light industrial buildings
>> General
Electric Room thermostat for Floor Heating-HTW-21-24 is used for 2-position control with on/off output for the control the temperature by means of an NTC sensor placed externally or internally in the thermostat.The thermostat acquires the room temperature with its built-in sensor or floor sensor, and the heating contact will close when the room temperature falls below the selected set-point.
For the control of warm-water (floor) heating systems and direct electric heating systems used in Commercial buildings, Residential buildings, Light industrial buildings
>> Features
• LED indicator is light when heating is on
•With manual switch and knob for easy operation
•On/off control output for heating device
•Setback function when connecting with a programmable timer
•Temperature limitation function for protecting the floor
>> Technical parameters
•Voltage: AC230V (AC110V / AC24V available)
•Power consumption: 5W
•Setting range: 4°C~45°C
•Limitation scale: 25°C~50°C
•Setback temperature: 5°C
•Switching differential: ±0.5K
•Ambient temperature: -5°C~50°C
•Protective housing: IP20
•Housing material: self-extinguishing PC
•Floor sensor: rubber-thermoplastic NTC sensor,
•Dimensions (H/W/D) 80/80/50 mm
•Cable length is 3m
>> Installation
>> FAQ
